Struct driver_pci::Status

pub struct Status(/* private fields */);

The status register in PCI configuration space.

Implementations

impl Status

pub const INTERRUPT_STATUS: Status = _

The state of the device’s INTx# signal.

pub const CAPABILITIES_LIST: Status = _

The device has a linked list of capabilities.

pub const MHZ_66_CAPABLE: Status = _

The device is capabile of running at 66 MHz rather than 33 MHz.

pub const FAST_BACK_TO_BACK_CAPABLE: Status = _

The device can accept fast back-to-back transactions not from the same agent.

pub const MASTER_DATA_PARITY_ERROR: Status = _

The bus agent observed a parity error (if parity error handling is enabled).

pub const SIGNALED_TARGET_ABORT: Status = _

A target device terminated a transaction with target-abort.

pub const RECEIVED_TARGET_ABORT: Status = _

A master device transaction was terminated with target-abort.

pub const RECEIVED_MASTER_ABORT: Status = _

A master device transaction was terminated with master-abort.

pub const SIGNALED_SYSTEM_ERROR: Status = _

A device asserts SERR#.

pub const DETECTED_PARITY_ERROR: Status = _

The device detects a parity error, even if parity error handling is disabled.

impl Status

pub const fn empty() -> Status

Get a flags value with all bits unset.

pub const fn all() -> Status

Get a flags value with all known bits set.

pub const fn bits(&self) -> u16

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u16) -> Option<Status>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u16) -> Status

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u16) -> Status

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Status>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Status) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Status) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Status)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Status)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Status)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Status, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Status) -> Status

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Status) -> Status

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Status) -> Status

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Status) -> Status

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Status

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl Status

pub const fn iter(&self) -> Iter<Status>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<Status>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for Status

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd for Status

fn bitand(self, other: Status) -> Status

The bitwise and (&) of the bits in two flags values.

type Output = Status

The resulting type after applying the & operator.

impl BitAndAssign for Status

fn bitand_assign(&mut self, other: Status)

The bitwise and (&) of the bits in two flags values.

impl BitOr for Status

fn bitor(self, other: Status) -> Status

The bitwise or (|) of the bits in two flags values.

type Output = Status

The resulting type after applying the | operator.

impl BitOrAssign for Status

fn bitor_assign(&mut self, other: Status)

The bitwise or (|) of the bits in two flags values.

impl BitXor for Status

fn bitxor(self, other: Status) -> Status

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = Status

The resulting type after applying the ^ operator.

impl BitXorAssign for Status

fn bitxor_assign(&mut self, other: Status)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for Status

fn clone(&self) -> Status

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Status

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for Status

fn default() -> Status

Returns the “default value” for a type.

impl Extend<Status> for Status

fn extend<T>(&mut self, iterator: T)

where T: IntoIterator<Item = Status>,

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for Status

const FLAGS: &'static [Flag<Status>] = _

The set of defined flags.

type Bits = u16

The underlying bits type.

fn bits(&self) -> u16

Get the underlying bits value.

fn from_bits_retain(bits: u16) -> Status

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call [Flags::insert] when value is true or [Flags::remove] when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<Status> for Status

fn from_iter<T>(iterator: T) -> Status

where T: IntoIterator<Item = Status>,

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for Status

type Item = Status

The type of the elements being iterated over.

type IntoIter = Iter<Status>

Which kind of iterator are we turning this into?

fn into_iter(self) -> <Status as IntoIterator>::IntoIter

Creates an iterator from a value.

impl LowerHex for Status

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Not for Status

fn not(self) -> Status

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = Status

The resulting type after applying the ! operator.

impl Octal for Status

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for Status

fn eq(&self, other: &Status) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Sub for Status

fn sub(self, other: Status) -> Status

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = Status

The resulting type after applying the - operator.

impl SubAssign for Status

fn sub_assign(&mut self, other: Status)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for Status

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Copy for Status

impl Eq for Status

impl StructuralEq for Status

impl StructuralPartialEq for Status